Tag Archives: HD

Wi-Fi adapter shootout: Qualcomm versus Intel in an 802.11 battle

Gamers are always hunting for a competitive edge, and the folks at Bigfoot Networks—now a part of Qualcomm Atheros—have long promised to deliver network interface cards that perform better with online games and other latency-sensitive applications. To demonstrate its prowess in this area, the company sent me two identical Alienware notebooks, one equipped with Qualcomm’s Killer Wireless-N 1202 and the other with Intel’s Centrino Advanced-N 6230.

Robert Cardin
We benchmarked two otherwise identical Alienware laptops: one outfitted with a Killer Wireless-N 1202 NIC (left) and the other with Intel’s Centrino Advanced-N 6230 (right).

Both NICs are dual-band adapters that can connect to an 802.11n router on either the 2.4GHz or 5GHz frequency band. Both also support two spatial streams for a maximum physical link rate of 300 megabits per second. Some gaming-laptop manufacturers, including Alienware, offer Killer NICs as standard equipment, while others offer the adapters as added-cost upgrades. You can also purchase one of these cards by itself and upgrade your existing notebook, provided that the system has an available Mini PCIe slot to host the card (a common feature on better notebooks). The Killer Wireless-N 1202 is certainly inexpensive enough: I’ve seen it selling online for as little as $35 (Intel’s card is street-priced at about $30).

The key selling point of Killer NIC technology is its ability to identify the types of traffic traveling over your network and to assign higher priority to latency-sensitive traffic, such as online games, HD video, and audio.

Latency is a measure of time delay. When applications such as online games and streaming media encounter too much latency, you’ll end up with visible and/or audible glitches and hiccups. If you’re playing a first-person shooter with an online opponent, latency can render you a frustratingly easy target.

To read this article in full or to leave a comment, please click here

…read more

Source: FULL ARTICLE at PCWorld

Intuitive Surgical's Sluggish Sales Sends Shares Lower

By Zacks.com, Contributor

Intuitive Surgical, best known for its da Vinci Surgical System which helps surgeons to perform operations with increased precision and control, benefited from high sales growth across the globe, but struggled in the U.S. market. The basis of the system uses robotics, while there are also HD 3D vision systems, and proprietary instrument technologies as well.Intuitive Surgical’s outlook was especially troubling because the company pinned the lower sales on the difficult environment in the U.S., and the lack of hospital dollars for new technologies. This bearish outlook is driving the stock sharply lower, with prices for Intuitive Surgical collapsing by about 14% in the past month alone. …read more

Source: FULL ARTICLE at Forbes Latest

Zelda: Wind Waker HD Reportedly Getting New Difficulty Mode

The HD remake of The Legend of Zelda: The Wind Waker coming to Wii U later this year will be priced at $49.99 in the United States and may include a new difficulty mode, according to a listing for the game on Amazon.

Wind Waker HD’s $49.99 price tag is $10 lower than the $59.99 price currently listed on the websites for retailers like GameStop and Best Buy. It’s also $10 lower than the launch price of many of Nintendo’s other Wii U titles, including New Super Mario Bros. U and Pikmin 3.

A lower price for an HD re-release might make sense on the surface, but there are indications more effort is going into Wind Waker HD than previously indicated.

Continue reading…

…read more

Source: FULL ARTICLE at IGN Video Games

Smart home security device gets even smarter over time

Wouldn’t it be nice to have an intelligent home system you can control from your phone? A system that is smart enough to know what is normal? A system that averts false alarms that fray the nerves of responders? A “smart” home security system called Canary is in the wings as an Indiegogo crowdfunding project. Canary seeks to convince people that it can be used as a standalone, well-featured system they can confidently continue to use, unlike some other alarm systems that send off repeated false alarms that discourage users from sticking with their alarm systems. Canary has a built in HD camera with night vision and wide-angle lens and monitoring sensors. Sounds, air quality, humidity, and temperature can be monitored. Sudden changes in temperature, for example, could mean a fire. …read more

Source: FULL ARTICLE at Phys.org

Where/who to buy 3/4 inch flexible PVC from?

By ToolbeltPajamas

Anyone have a good recommendation on a place that sells 3/4 inch flexible PVC?

Ideally by the foot or in 50 foot increments?

Sadly, Amazon and Lowes and HD have nothing really other than HD has Orbit 3/4 inch (drop-shipped) which I’ll consider but not a real fan of Orbit.

I can find these random sellers on the internet but they are all small and would prefer a recommendation on good vendor with ideally a good price (especially since shipping hurts).

Any suggestions would be great.

Note: Using this not for spa/pool but rather for irrigation after the valve.

…read more

Source: DoItYourself.com

Halloween 35th Anniversary Blu-ray Revealed!

Halloween 35th Anniversary BD 3D

Anchor Bay has announced an all-new HD transfer of John Carpenter’s 1978 horror masterwork, Halloween, for the Halloween 35th Anniversary Blu-ray. This edition will also contain a new 7.1 audio mix along with a commentary track from Carpenter and star Jamie Lee Curtis.

The Halloween 35th Anniversary Blu-ray will be available on September 24th.

We’ve also got your first look at the Blu-ray cover art for this special edition, gloriously adorned with a haunting image of Michael Myers’ mask sharing the space with darkness…

Continue reading…

…read more

Source: FULL ARTICLE at IGN Movies

Jono Bacon: Announcing the Ubuntu Edge

Last week many of you will have seen the teasers that were shared on www.ubuntu.com. As you can imagine, our community, the press, and others picked up on this with rampant curiosity of what was to come. I am delighted to see the news is now out there, and boy, is this exciting.

In a nutshell, today we are kicking off an Indigogo crowdfunding campaign to fund a fully converged device called Ubuntu Edge.

Can’t see the video? See it here!

The Ubuntu Edge will dual boot Ubuntu and Android, and will transform into a PC when docked with a monitor, with the full Ubuntu desktop and shared access to all the phone’s files. For this it needs the power of a PC, so Ubuntu Edge will be equipped with the latest, fastest processor, at least 4GB of RAM and a massive 128GB of storage.

Every week on my weekly Q&A many of you ask when you can buy a fully converged Ubuntu device in which you can use it as a phone and boot a desktop, and here it is. Now is the opportunity to not only buy one, but to contribute to showing your support for an Ubuntu converged device by contributing to the campaign.

The Ubuntu Edge is not only functionally powerful though. This beautifully crafted device replaces the traditional glass screen with a pure Sapphire crystal, so tough it could only be scratched by diamond. It will also pioneer the use of long-life silicon anode battery technology. A special dual-LTE solution will allow high-speed roaming with access to 4G-LTE broadband in both Europe and the US.

I know many of you who are reading this will be interested in the technical specs, which are:

  • Dual-boot Ubuntu Edge into either Ubuntu or Android
  • Becomes a fully integrated Ubuntu desktop PC when docked
  • Fast and powerful device with multi-core CPU and at least 4GB RAM
  • 128GB of storage for photos, music, content
  • 4.5in 1,280 x 720 HD display with pure sapphire crystal screen, the hardest natural substance after diamond
  • Cameras made for low-light, fast response and close up pictures: 8mp rear camera, 2mp front
  • Faster connection all over the world with dual-LTE, dual-band 802.11n Wi-Fi, Bluetooth 4, NFC
  • Connect to HDMI TVs and monitors easily with MHL connector, 3.5mm jack
  • GPS, accelerometer, gyro, proximity sensor, compass, barometer
  • Stereo speakers with HD audio, dual-mic recording, Active Noise Cancellation
  • Silicon-anode Li-Ion battery
  • 64 x 9 x 124mm.

(specifications are subject to change)

All in all this is a beautiful powerhouse for running a fully converged Ubuntu experience – not just a phone, but a phone and your desktop all in one package that looks and feels uniquely Ubuntu.

The Campaign

For the next 30 days our goal is to reach $32 million, an unprecedented amount raised in a crowd-sourcing campaign. Fortunately we have an incredible global community, and we are asking each of you to contribute what you can to the campaign.

The idea is simple: by committing $600 (£394) on day one, or $810 (£532) thereafter, you will receive one of these ground-breaking mobile devices in …read more

Source: FULL ARTICLE at Planet Ubuntu

Wire for sub-panel

By jnnewton

I need to add a sub panel in my attached garage. The reason being that I’m out of breaker slots on my main 200A panel due to the fact that I currently have 6 circuits running to the garage 2x 30A 115 for the heaters (4 heaters @ 12.5A), 2 115 for two sets of outlets (so i can run the bandsaw while using other tools without blowing a breaker), 1 for the AC, 1 for 230VAC (mill). I need to add two more, and one in the basement, so i think it’s time. I’ve decided that a 100A subpanel would give me plenty of room to add dedicated circuits (I have a few pieces of equipment on my wish list)

Q1: I have plenty of 4AWG CU wire, but cannot find a definitive answer as to whether it’s legal. Here’s the marking: “4AWG E51293(UL) MTW OR THW OR AWM 1232/1283/1337 600V VW-1 — LL22035 CSA TEW OR AWM 0 600V 105C W750C FT1 I A/E” Can anyone tell me if this is legal wire for feeding the subpanel L1, L2 & N? If not, I’ll just go to HD and get whatever they tell me is the preferred wire, but I’d rather not spend the $$$ if I don’t have to.

Q2: The wall it’s going on is the one that separates the garage and the house. Once I attach some wood (whatever I can find that is sturdy) to the wall, mount the box, and pull the feed wire into the garage, I feel it will be unprotected from me dragging stuff around, carrying metal, etc. I could drill holes back through the wall (2x 3/4″ OSB + 3/4″ drywall), and then route through the walls, but I know that wall is some sort of firewall of sorts, and am not sure the code on drilling several holes in it. Is this OK? I really want to encase it in a cabinet as well, but I’ve read this violates code (no cabinets, countertops, etc). Is there a better way to protect / hide it that is legal?

Q3: I have an odd back 3ft of the garage, in that I cannot run wiring from the walls to the attic / ceiling without drilling through an I-beam (which I won’t do). I have cabinets along one side and around the corner. They are against a footer on the side, and matched distance on the back. so not all the way against the wall. Is it legal to use that area between the cabinet and the wall, on top of the footer / floor as a “wireway” to avoid tearing out tons of drywall to drill through studs and run wire horizontally?

…read more

Source: DoItYourself.com

Easy bathroom floor for tenant.

By Michael Rivers

My tenant’s bathroom is currently carpeted thanks to decisions by a previous owner. I would like to get rid of that carpeting and give her something better.

Caveats
1) The tub, vanity, and linen closet are out of date and could stand to be replaced (probably not the tub, that’s too much work), but I won’t have that kind of money for several years, since I have other more important projects.

2) Because the project will need to be redone when I replace the vanity and build a better closet, I do not want to lay a floor that will be difficult to remove, so no radiant flooring covered by cement and marble tiles at this time.

3) I have no idea what is under the carpet, so I need something that does not require a perfectly smooth and level surface.

4) This is a bathroom in a rental unit. I need something that will at least mostly prevent water from getting to the sub floor.

I was considering Luxury Vinyl Planks, but I am concerned that water can get between the joints.

Another thing I am considering is some cheap vinyl planks from HD, but question if they will even last long enough to still be in place before it comes time to install something better down the road.

Anyone have experience with this product or advice on other products?

…read more

Source: DoItYourself.com

Homeworld, Homeworld 2 HD Remakes Announced

During a panel at PAX Australia today, Gearbox announced upcoming HD remakes of Homeworld and Homeworld 2. In addition, the studio will make original, unaltered versions of both games available digitally.

No specific pricing or release date for either the HD versions or the unaltered versions has been announced, but Gearbox head Randy Pitchford noted that a “small team” is currently hard at work on the projects at Gearbox.

Gearbox acquired the rights to Homeworld back in April from THQ. At the time, Gearbox chief creative officer Brian Martel said the studio plans “to preserve and assemble the purest form of the original acclaimed and beloved games.”

Continue reading…

…read more

Source: FULL ARTICLE at IGN Video Games

Soul Calibur 2 HD Online Announced

During its San Diego Comic-Con panel today, NamcoBandai Games announced an HD, multiplayer-enabled remake of its classic fighting game, Soul Calibur II. It will release on Xbox 360 and PlayStation 3 this fall.

In the teaser trailer shown to attendees, Tekken’s Heihachi Mishima was shown — the presence of Nintendo’s Link, who guested in the Gamecube version, and McFarlane’s Spawn, who appeared in the Xbox version — were not present. Licensing expiration and platform competition could mean neither will be present.

Mitch Dyer is an Associate Editor at IGN. He’s currently reading Joe Hill’s Heart Shaped Box. Read his ramblings on Twitter and follow him on IGN.

Continue reading…

…read more

Source: FULL ARTICLE at IGN Video Games

Person Asks UFO To Come And It Does, Los Angeles, CA On July 2013.

By ScottCWaring

Date of sighting: July 14, 2013
Location of sighting: Los Angeles, California, USA

Robert Bingham has a gift…to be able to call or ask UFOs to appear and they do most of the time. This week he held an event and many eyewitnesses were there and saw first hand an alien craft or entity appear over them. It does look a lot like a person more than a craft, but thats up to each person to decide. Amazing guy and I hope someone somewhere gets a close up of this UFO so we can see it in HD detail. SCW

…read more

Source: FULL ARTICLE at UFO Sightings Daily

Analyst Believes The PS4, Xbox One And Wii U Won't Match Their Predecessor's Sales

By Paul Tassi, Contributor

A new report from ABI Research has some dour predictions for the coming console generation which includes the Wii U, Xbox One and PlayStation 4. They believe that despite advancements in technology like streaming capabilities, ultra HD graphics and so on, this new generation won’t match the sales of the previous one, at least not any time soon. …read more

Source: FULL ARTICLE at Forbes Latest

Gigabit-boosted DSL Internet standard could be ready in 2014, ITU says

A broadband standard that aims to support bandwidth-intensive applications such as streaming Ultra-HDTV movies without the need to install fiber between the distribution point and people’s homes met its first-stage approval, the International Telecommunication Union (ITU) said on Tuesday.

The broadband standard is called G.fast and promises up to 1Gbps over existing copper telephone wires. The standard is designed to deliver super-fast downloads over a distance of 250 meters, eliminating the expense of fiber cables to peoples’ homes, the ITU said in a news release.

G.fast passed the first-stage approval of the ITU standard that specifies methods to minimize the risk of G.fast equipment interfering with broadcast services such as FM radio, the ITU said. If all goes well, G.fast will be approved in early 2014, it added.

The standard is expected to be deployed by service providers that want to offer Fiber to the Home-like services, the ITU said. G.fast is meant to enable flexible upstream and downstream speeds to support bandwidth-intensive applications such as uploading high-resolution video and photo libraries to cloud-based storage, and communicating via HD video, it said.

To read this article in full or to leave a comment, please click here

…read more

Source: FULL ARTICLE at PCWorld

Geometry adjustment knobs inside the housing?

By T-W-X

Hey all,

I have a Panasonic CT30WX52 television. It’s an HD tube, not a common type, got it very gently used a couple of years ago.

I’ve noticed that modern HD broadcast signals make more use of the picture than older SD signals did, in that modern LCD HD TVs run the image right up to the edge. Older TVs had some portion of the image concealed behind the plastic frame around the CRT.

This CRT TV operates in the old style, with portions of the image as designed in the new style off the edge, and occasionally some things, like weather information and some closed captioning are not visible on-screen, cut off at the edge.

Since the TV weighs 126lb, if anyone can confirm if there are manual horizontal and vertical sync/hold knobs before I drag it out of its cubby and open it, I’d much appreciate it.

I’ve opened CRT computer monitors to adjust the picture position and size before, but it has been awhile. I tried looking up technical service information on the unit but couldn’t find anything beyond users’ manuals which don’t go into such details.

Thanks,

…read more

Source: DoItYourself.com

11 Yr old Cedar deck….flip boards or strip?

By michaeljc70

My 10×18 deck is cedar decking(steel frame) and 11 years old. I put a semi transparent stain on the last 2 years and it has peeled about 20% and looks like hell.

I bought some stripper at the local home improvement store and applied according to the directions. With the power washer, it barely removed anything.

If I use the power washer alone, I am worried about 1) time it will take and 2)raising the grain of the wood.

I was going to order some HD-80 professional deck stripper and try that. My Father suggested turning the boards over. They are nailed and I am worried about splits removing them. There is also some spillover of stain on the underside, but otherwise, they look good. The topside looks okay- some minor splitting after 11 years, but not bad.

I would just replace these, but I plan on moving in the next year so am just looking to get through 1 more season. My question is stripping or flipping my better option?

Source: DoItYourself.com

Recover a mistaken swap-formated USB-HD

By IMPe

Hi!
Installing the debian wheezy by netinstall my external USB-HD (2TB) is erroneously completly formated as swap-filesystem. I was to lazy to disconnect the USB-HD, so now i could kick myself .
Is there any chance to rescue the data. I tried to find a way by using
gparted: the whole HD is swap-fs. I only check with gparted, i didn’t do any format-action.
and
testdisk. analyze and deeper search

both only see swap-fs and testdisk cant find anything.
I need a helping hint, because i need urgently some of the primary stored backup-data.

thanks in advance
IMPe

From: http://www.unix.com/filesystems-disks-memory/221733-recover-mistaken-swap-formated-usb-hd.html