Tag Archives: DOC

Ex-inmate suspected of killing Colorado prisons chief freed 4 years too soon

Because of a paperwork error, the suspect in last month’s killing of Colorado’s corrections chief was freed from prison in January — four years earlier than authorities intended.

Judicial officials acknowledged Monday that Evan Spencer Ebel’s previous felony conviction had been inaccurately recorded and his release was a mistake.

In 2008, Ebel pleaded guilty in rural Fremont County to assaulting a prison officer. In the plea deal, Ebel was to be sentenced to up to four additional years in prison, to be served after he completed the eight-year sentence that put him behind bars in 2005, according to a statement from Colorado’s 11th Judicial District.

However, the judge did not say the sentence was meant to be “consecutive,” or in addition to, Ebel’s current one. So the court clerk recorded it as one to be served “concurrently,” or at the same time. That’s the information that went to the state prisons, the statement said.

So on Jan. 28, prisons officials saw that Ebel had finished his court-ordered sentence and released him. They said they had no way of knowing the plea deal was intended to keep Ebel behind bars for years longer.

Two months later, Ebel was dead after a shootout with authorities in Texas. The gun he used in the March 21 gunbattle was the same one used to shoot and kill prisons chief Tom Clements two days earlier. Police believe Ebel also was involved in the death of a Domino’s Pizza delivery man, Nathan Leon, in Denver.

“The court regrets this oversight and extends condolences to the families of Mr. Nathan Leon and Mr. Tom Clements,” said a statement signed by Charles Barton, chief judge of the 11th Judicial District, and court administrator Walter Blair.

Leon’s father-in-law told AP he had no immediate comment

“There should be more than just a two-sentence apology,” Leon’s sister-in-law Amber Lane told The Denver Post. “I thank somebody for taking accountability for the error, however it doesn’t bring Nate back.”

The court officials vowed to review their procedures to ensure the error isn’t repeated.

“The Colorado Department of Corrections values its long-standing partnership with the 11th Judicial District and the district attorney’s office to maintain order at the prisons in Canon City. We commend both the 11th Judicial District and the DOC for reviewing their own internal processes and procedures,” Gov. John Hickenlooper’s spokeswoman Megan Castle said in a written statement.

The attack that led to the plea deal took place in 2006. According to prison and court records, Ebel slipped out of his handcuffs while being transferred from a cell and punched a prison officer in the face. He bloodied the officer’s nose and finger, and threatened to kill the officer’s family.

“If Mr. Ebel was prosecuted for an assault on an officer, it had to be pretty severe, because in the course of day-to-day work, correctional officers are regularly assaulted or threatened,” said Pueblo County Commissioner Buffie McFadyen, who is executive director of the correctional officer group Corrections U.S.A.

“It sounds like a horrific oversight,” she said of the mistake that led to …read more
Source: FULL ARTICLE at Fox US News

Colorado investigation into head of correction's killing turns to getaway car

The shooting death of Colorado Department of Corrections director Tom Clements at the front door of his Monument home has set off a hunt for his killer and raised questions about whether the attack had anything to do with his position.

Authorities are also looking for a dark-colored “boxy” car seen near Clements’ house when he was shot around 8:30 p.m. Tuesday. The vehicle’s engine was running and a witness reported seeing one person driving away in the car.

Lt. Jeff Kramer of the El Paso County Sheriff’s Office said investigators have not ruled anything out, but the shooting could have been related to Clements’ job as the state’s top prison official.

Deputies received a 911 call from a relative at 8:37 p.m. reporting the shooting. There was one other person at the home with Clements at the time of the shooting.

Kramer said a resident saw a boxy-style, dark-colored, 2-door, 90s-model vehicle running unoccupied and parked at an intersection near the scene of the shooting.

No suspects have been named nor has a motive been discovered.

Kramer said Clement’s position as the head of the DOC “opens a dynamic” in the investigation, meaning that someone related to the prisons may have wanted to harm him, KDVR.com reported.

“We’re less than 12 hours into this investigation,” Kramer said. “In terms of a shooting, that’s fairly early. We don’t believe there is an imminent threat to this local community, but because we don’t have a suspect and don’t know the whereabouts of any suspects, we do want folks to remain vigilant.”

Colorado Gov. John Hickenlooper was red-eyed and somber and spoke haltingly Wednesday morning at a news conference in which he said he doesn’t think the killing was part of any larger attack against his cabinet.

It would have been simple to find where Clements lived. It took two clicks to get his correct street address through a publicly available internet locator service Wednesday morning. The listing also included his previous home address in Missouri.

The Associated Press contributed to this report

Click for more from KDVR.com

…read more
Source: FULL ARTICLE at Fox US News

Tessera Technologies Announces Refocused DigitalOptics Business Strategy and Restructuring

By Business Wirevia The Motley Fool

Filed under:

Tessera Technologies Announces Refocused DigitalOptics Business Strategy and Restructuring

DOC Will Concentrate on its Differentiated Technology and Leverage Partner Relationships

Company Operating Expenses in DOC and Corporate Overhead Are Expected to be Reduced by $78 Million or Approximately 45%, Excluding Charges

SAN JOSE, Calif.–(BUSINESS WIRE)– Tessera Technologies, Inc. (NAS: TSRA) (the “Company”) today announced that it is refocusing its DigitalOptics Corporation (“DOC“) business strategy to achieve the full potential of its differentiated imaging technology while reducing costs. The Company expects to reduce operating expenses in DigitalOptics Corporation (“DOC“) and Corporate Overhead by approximately $78 million, or 45%, on an annualized basis exiting 2013, as compared to 2012.

The Company has determined that it is no longer necessary for DOC to be a vertically integrated camera module supplier. DOC will instead focus its strategy on the differentiated MEMS-related technologies, where it has proprietary assembly technology and expertise, and will partner with third-party manufacturers to produce other components of the full camera module. DOC will continue to productize the mems|cam technology throughout the rest of the year, and expects to ship small production volumes of its technology in 2013.

The refocused DOC strategy and restructuring resulted from a business strategy review directed by a committee of independent directors (the “Committee”), led by Richard S. Hill, former chairman and CEO of Novellus Systems. The Committee worked with management to evaluate the Company’s overall business opportunity, strategy and operating model. The Committee and the Board of Directors will continue to monitor the DOC business closely to ensure that its strategy and business model are appropriate for the market opportunity.

“Our Board is taking action to deliver value for our stockholders in both the near and long term,” said Hill. “DOC‘s recently launched mems|cam technology is a disruptive technology that will be an inflection point in – and the future of – imaging solutions in the smartphone, tablet and other mobile imaging segments. Given the emerging acceptance of the mems|cam technology in the marketplace, we can now shift our strategy to focus on the areas of manufacturing where we have a defensible, differentiated advantage and better leverage our manufacturing partners. Our goal is to accelerate the success of DOC while reducing costs, which we expect to improve the overall financial performance of the Company.”

“These actions will result in a less capital-intensive approach for our DOC business, which will enable us to continue to innovate and develop the product and manufacturing capabilities that …read more
Source: FULL ARTICLE at DailyFinance

Manhunt after head of Colorado Department of Corrections killed in home

The head of the Colorado Department of Corrections has been shot and killed at his home, and authorities say the gunman is on the loose.

Sheriff’s Lt. Jeff Kramer says Tom Clements was shot to death around 8:30 p.m. Tuesday night when he answered his front door in the town of Monument, north of Colorado Springs. It is unclear if his wife and two daughters were home at the time of the shooting. Police are searching for the shooter.

Kramer, however, says a family member called 911 to report the shooting and officers found Clements dead in his home. Kramer says search dogs have been called in to search a wooded area around Clements’ home

In a letter to DOC employees, Governor John Hickenlooper confirmed that the 58-year-old had been killed, KDVR.com reported.

“We have no more details than that,” Hickenlooper wrote. “I am so sad. I have never worked with a better person than Tom, and I can’t imagine our team without him. … As your Executive Director, he helped change and improve DOC in two years more than most people could do in eight years.”

Click for more from KDVR.com

The Associated Press contributed to this report

…read more
Source: FULL ARTICLE at Fox US News

Tenneco Receives John Deere Supplier Innovation Award

By Business Wirevia The Motley Fool

Filed under:

Tenneco Receives John Deere Supplier Innovation Award

LAKE FOREST, Ill.–(BUSINESS WIRE)– Tenneco Inc. (NYS: TEN) has been selected as a recipient of a John Deere 2012 supplier innovation award for the development of an integrated selective catalytic reduction (SCR) and mixing system which is incorporated into a Tier 4 Final diesel aftertreatment system.

The award is presented to a select group of suppliers who have demonstrated innovation in a product or service they provide to John Deere. Award selections are based on four factors – creativity, feasibility, collaboration, and bottom-line impact. John Deere created the supplier innovation awards in 2010 to promote innovation in the company’s supply base and recognize suppliers who think creatively.

Tenneco is a global supplier to John Deere, and began providing diesel aftertreatment products including diesel oxidation catalysts (DOC) and diesel particulate filters (DPF) for certain Tier 4 interim applications in 2010.

“Tenneco is honored to be recognized for our innovation and proud to partner with John Deere on aftertreatment technology for reducing nitrogen oxides (NOx) and particulate emissions,” said Neal Yanos, Tenneco executive vice president. “Tenneco’s commercial vehicle business continues to grow, driven by the strength of our clean air technology portfolio and our commitment to help our customers comply with increasingly stringent global emissions regulations.”

Tenneco is a $7.4 billion global manufacturing company with headquarters in Lake Forest, Illinois and approximately 25,000 employees worldwide. Tenneco is one of the world’s largest designers, manufacturers and marketers of clean air and ride performance products and systems for automotive and commercial vehicle original equipment markets and the aftermarket. Tenneco’s principal brand names are Monroe®, Walker®, XNOx™ and Clevite®Elastomer.

This press release contains forward-looking statements. Words such as “anticipate,” “expects,” “will”, “continue” and similar expressions identify forward-looking statements. These forward-looking statements are based on the current expectations of the company (including its subsidiaries). Because these forward-looking statements involve risks and uncertainties, the company’s plans, actions and actual results could differ materially. Among the factors that could cause these plans, actions and results to differ materially from current expectations are: (i) changes in automotive or commercial vehicle manufacturers’ production rates and their actual and forecasted requirements for the company’s products, including the company’s resultant inability to realize the sales represented by its awarded book of business; (ii) any change in customer demand due to delays in the adoption or enforcement of worldwide emissions regulations or any other changes in consumer demand and prices, including decreases in …read more
Source: FULL ARTICLE at DailyFinance

Review: Free Editor lets you open and edit over 70 different file types for free

In our everyday lives, we use a number of different programs to edit the various file types we work with. There’s Word for DOC files, Excel for XLS files, PowerPoint for presentations, image editors, video and music players, PDF viewers, Hex editors, ZIP expanders, and the list goes on. Most of us use a separate program for each one of these purposes and never stop to think about it. Free Editor claims to open for viewing and editing all the aforementioned file types, and more, all by itself.

For DOC files, Free Editor includes all the basic formatting options, including tables, links, highlighting, etc.

Free Editor, as you can gather from the name, is completely free to use, and according to its support pages, can open and edit 75 different file types, including Microsoft Office files, other document files, image files, Windows files and coding files. I chose to start my tests with simple DOCX and XLSX files, and took Free Editor through its paces. I was immediately impressed by how lightweight and responsive it felt; there was no hanging and no waiting, and aside from a weird but harmless error message which appeared every time I opened a Word 2007 file, I could edit any file I chose to.

For Word documents, Free Editor supports all the basic editing functions such as formatting, images, links, tables, numbered or bullet lists, find and replace, and more. The table toolbar is especially easy to use, and surpasses even Word’s native table tools. The editor also includes a spellchecker, which is a nice touch. While Free Editor managed to show any DOC and DOCX file I fed to it, it failed to show figures and images that were already in the document.

With Excel files, things get a bit trickier, as Free Editor does not include Excel’s formula bar, which makes it next to impossible to use formulas. While you can insert any formula you wish, there are no helpful suggestions to help you along, and after entering a formula and getting a result, there’s no easy way to know which formula is written in the cell. Surprisingly, Free Editor does include more advanced editing options, such as conditional formatting—but with an oversight as big as the missing formula bar, it’s just not enough.

To read this article in full or to leave a comment, please click here

…read more
Source: FULL ARTICLE at PCWorld

Improved Calligra for Windows after Sprint Weekend

Calligra Suite has seen improvements on Windows after a few important bugs were fixed over last weekend’s sprint in Magdeburg:

  • Calligra Words now has improved support for Microsoft .doc files, aligning with that available to Linux users.
  • Calligra Stage may now be used to give presentations, with support for multiple-monitors and the Presenter View, a custom display which assists the speaker by showing timer, slide notes and views of the current and next slide.

This updated version has been packaged and is available on KO GmbH’s downloads page.

The last few days Camilla and myself have been working to get Calligra running much more reliably on Windows – her experience in KDE, Calligra and general Linux development were invaluable, and being able to bring my own experience with the Windows platform and the build environments maintained by our employer were seen to be a perfect opportunity to host a sprint at KO GmbH‘s headquarters in Germany.

We started Friday with two big issues:

  • Microsoft .DOC import filter would load documents, but without text
  • CalligraStage would crash when the user tried to give a presentation

We started out reviewing sample documents which reflected the first issue – documents were being loaded with their structure intact (which we could see thanks to the TextDocument Inspector tool – thanks Friedrich!) but with the text missing.

Comparing stack traces helped us discover that LibreOffice and MS Word authored files were encoded slightly differently, and that the MS Word files used a format which required text to be passed through a text-converter object built on top of iconv, a text conversion library. On Windows, the iconv library used did not list the requested encoding “UNICODELITTLE” in its codepage lookup table. References to UNICODELITTLE and UNICODEBIG were replaced by UCS-2LE and UCS-2BE, which were recognised on Linux, Windows and Mac platforms. Rebuilding and opening a doc, and text!

Whilst testing the sample documents, an issue with the positioning of tables was also seen with the Windows build of the msword-odf filter only. Comparing Windows and Linux stack traces to see where the tables were being inserted into the ODT documents showed that, quite to our surprise, the Linux code didn’t follow the same execution path as Windows – all tables with the Windows-built filter were being treated as floating, even those in the test document which were not. The culprit was an uninitialised “isFloating” member variable in a data structure. A default constructor and a rebuild, and they suddenly appeared where they belonged, rather than stacked all on top of each other at the start of the document!

Calligra Stage was a little more problematic owing to issues with the build environment which affected Stage, but not Calligra Words. Thankfully we managed to find a workaround that would let us focus on debugging the presentation error. Previously we’d tried to fix this problem, and it looked like an object was getting lost, yet the event for the object was being triggered correctly with a valid object. It turned out there were subtle differences to how one could work with QWidgets in the two platforms – setting our slide-view widget’s parent to the QDesktopWidget worked fine in Linux, but led to an access violation error in Windows. Removing these calls in Windows, relying just on setting Fullscreen suddenly had presentations working, albeit hidden by the taskbar, and with an odd border. It was determined that the calls to resize and move the Widget after making it fullscreen were the problem. These were wrapped in a single setGeometry call and the fullscreen call moved til after this operation – now presentations worked, fullscreen and to secondary monitors. The Presenter View was fixed in a similar fashion, bringing the Calligra feature-set in Windows closer in line with that enjoyed by its Linux users.

The sprint was very rewarding, fixing the original document import issue, finding another and having time to fix a serious bug with Stage presentations, all making real progress towards making Calligra more usable on Windows.
Source: FULL ARTICLE at Planet KDE