By laurensche
lauren
Source: DoItYourself.com
By laurensche
Source: DoItYourself.com
I am going to run a Raspberry Pi (Raspberry Pi | An ARM GNU/Linux box for $25. Take a byte!) with RaspBMC running on it as my media player coupled with a usb hub and external 2.5″ hdd for media storage.
I am going to use a M2 Micro Projector (M2 Micro Projector 2013 – TopTenREVIEWS) for my display projecting on to a screen hung up in between trees.
I am going to run a Bosch PB360D (www.boschtools.com/products/tools/Pages… as a portable sound system for this set up.
I want to get a small quiet power generator for this set up to be able to run it all night (8-10 hours) I want to know how much power I will need to be able to do this, and also if I would be able to charge up a car battery or something similar and just run everything off a battery for the duration of the night.
any suggestions?
Thanks in advance!
Source: DoItYourself.com
By sgull
http://i207.photobucket.com/albums/b…psaaccd8d1.jpg
I had assumed the damaged cord is what caused the tool to quit abruptly and that perhaps replacing the plug would take care of the problem. But no, I find after replacing the plug it still won’t power on. So maybe a bad switch, I’m thinking now. So I was going to open it up and see if I could at least take a look at the switch. So I removed the seven screws that hold the two halves of the casing together but something in there is still holding it tight together around the point where the handle was (which I broke off fighting with it, doesn’t matter I don’t care). As you can see with the picture here, I’ve pried and buggered up the plastic along the seam by prying with screwdriver trying to get the blasted thing to open. So although I’d be surprised if anybody here has ever tried to open one of these things (or even has one for that matter), any suggestions as to what I need to do now to get it open would be appreciated. Also, even if I do manage to get it open and maybe see that the switch is damaged, I don’t see anyplace where there is such a replacement part for this particular tool. I checked ereplacementparts.com and a few other places. I called Wagner support they said these tools are non-repairable if anything happens to them internally and that all they can do maybe replace the tool if its still under warrantee, which mine isn’t. Still, I woudn’t mind being able to open the dang thing. Unless there’s any further suggestions I’ll probably just keep prying some more until it breaks some more I suppose. :wall:
Source: DoItYourself.com
By Holly Blaser
Near the edge of the tub, the grout on the wall has rust stains. I was able to use a bissell steamer to get it clean and white, but then hours later the rust returned. This is on the back wall of the shower, not near the faucet. As you can see in the photos there’s also some hairline cracks in the tile around the soap holder. They’re not visible when I clean them, but when the rust returns it seems to show up.
I’m not sure if that occurred when they put in the soap holder, or if there’s some pressure coming from behind that caused it to crack. Just can’t imagine what would happen in a shower that would cause a tile to hairline crack like that.
I couldn’t find any specific information about this problem online. I looked at the floorboards underneath which are in our laundry room and I don’t see any evidence of water damage so I’m not sure what’s going on here, and why the rust returns after I clean it. Any thoughts or suggestions would be appreciated!


Source: DoItYourself.com
By FOXBusiness
Filed under: Market News
By KATE ROGERS
Detroit made history Thursday as the largest American city in history to ever file for Chapter 9 bankruptcy protection. The once vibrant city rooted in auto manufacturing and music finally fell victim to its dire financial situation, with between $18 billion and $20 billion in debt.
While city emergency manager Kevyn Orr says it will be “business as usual” in Detroit, experts say residents may be impacted in three major areas–pensions, city services and tax rates.
The Pension Problem
The city has yet to confirm how pensions will be impacted, although there have been suggestions that pensions will be reduced, says Bob Tomarelli, IHS Global Insights economist. The wildcard in the situation is the fact that the Michigan state constitution has a provision which some union leaders say bars pension cuts.
The provision says “the accrued financial benefits of each pension plan and retirement system in the state and its political subdivisions shall be a contractual obligation which shall not be diminished or impaired thereby.”
“The next question here is what does the judge do? The provision seems pretty clear cut, but a judge can rule that they can cut pensions,” Tomarelli says.
There are an estimated 30,000 retirees who are currently receiving pensions, he says, and an estimated $9.2 billion in pension debts.
Pensions potentially have some major changes ahead, says Alison Fraser, Heritage Foundation senior fellow and director of government finance programs.
“They are already in lawsuits with the pension programs themselves,” Fraser says of the city. “It’s unclear what the legal questions are when you go into bankruptcy. There is some possibility pensions will be redone in some way, and it will be very difficult for those who area already retired on those pensions.”
Overall, Fraser believes bankruptcy was the right way to go, as the city was irresponsible with its finances and the process will allow Detroit to restructure its debt.
City Service Cuts
Orr says the filing is the “first step toward restoring the city” and that it will be business as usual in Detroit.
“He says the lights will stay on, but it depends on what haircut the creditors will take on secured bonds, and knowing if and how much pension payments will be cut,” Tomarelli says. “They then decide how much money will be cut and saved on public services.”
Detroit has lost a massive number of residents over the past half century, and now is home to around 700,000 citizens, post-auto bailout and Great Recession. Tomarelli says if the city cuts public services, it would likely be less appealing to potential residents.
“People are still leaving Detroit at a faster rate than they are Michigan,” he says. “If there is a great reduction in services, it may be a less attractive city to live in.”
Tax Hikes on the Way?
Detroit’s current tax …read more
Source: FULL ARTICLE at DailyFinance
By Patrick Moorhead, Contributor
Benchmarks are used in every market as one way to show why one company’s widget is better than another company’s widget. Whether it’s MPG on a car, energy ratings on appliances, or a Wine Spectator rating, it’s a benchmark. The high-tech industry loves benchmarks, too, and there is an industry full of companies and organizations that do nothing but develop and distribute benchmarks. With high-tech benchmarks come controversy, because the stakes are high as all things equal, the widget with the highest benchmark scores will typically receive more money. The recent spat about Intel versus ARM in smartphones illustrates what is wrong with the “system”. I want to explore this and offer some suggestions to help fix what is broken. The first thing I want to highlight is that getting benchmarks “right” is important to the buyer. If a buyer makes a choice based on a benchmark and either the benchmark isn’t representative of a comparative user experience or if the benchmark has been manipulated, the buyer has been misled. The first case would be like a buyer buying a racing boat based on the number cup holders and the second would be an auto MPG test during 100 mph tail winds. The smartphone benchmark blow-up has accusations of both and reminds me a bit of a Big Brother episode. …read more
Source: FULL ARTICLE at Forbes Latest
Bernie Ecclestone started out as a simple second-hand car salesman and went on to transform Formula One motor-racing into one of the most profitable sports the world.
German prosecutors on Wednesday indicted the British magnate on a bribery charge, but the 82-year-old has refused to resign as Formula One boss, despite facing a trial and a possible prison sentence.
However, the prospect of having to find a replacement for Ecclestone, on whose F1 decisions hang billion of dollars, sent shivers through the motor racing fraternity.
“F1 is what it is thanks to Bernie Ecclestone, to the way he has built this sport over the past 35 years,” said his compatriot Christian Horner, team principal at world champions Red Bull, when asked about a possible succession.
“Everything we see here is based on what he did and succeeded in doing. I think that without him we would have big problems.”
Despite his age, Ecclestone has brushed off suggestions that he is soon to retire and has insisted that his legal woes will not lead him to resign.
“I don’t see why I should do that, I will do what I have always done: keep working and do my job,” Ecclestone told German newspaper Bild.
Ecclestone has been charged by Munich prosecutors in relation to a $44 million (33.6 million euro) payment he made to German banker Gerhard Gribkowsky which was linked to the sale of the Formula One rights in 2006.
Dubbed “Napoleon” due to his 1.63-metre (five foot, four inch) stature and firm control over Formula One, Ecclestone was valued by Forbes magazine at $3.8 billion in March 2013, making him one of the richest 500 people in the world.
He is no stranger to controversy.
He was in the spotlight in late 1997 owing to a donation of 1.5 million pounds ($2.3 million, 1.75 million euros) to the Labour Party of then prime minister Tony Blair, which subsequently authorised the continued use of tobacco advertising by the sport.
Holder of a degree from Woolwich Polytechnic in southeast London, Ecclestone, known for his trademark white shirt and black trousers, began his career selling cars and motorcycles in the capital, and also briefly drove race cars himself.
However, his career was cut short by an accident.
In the early 1970s, Ecclestone set up the Brabham team.
Then, with competitors, he established the Formula One Constructors Association, gathering around him the other chiefs of motor racing stables to defend their interests against what became the International Automobile Federation (FIA).
One of the first to recognise the potential in sponsorship, he became the exclusive manager of F1 rights, taking the helm of Formula One Management, negotiating with circuits, advertisers and television stations.
“The contracts he negotiated, the circuits and the countries to which he brought F1, are remarkable. As long as he has the passion and enthusiasm to continue it is in our interests that he does it as long as possible,” Horner said.
“The day he is no longer there our sport will go much less well,” said the man some see as a potential successor to Ecclestone.
Ecclestone’s fortune …read more
Source: FULL ARTICLE at Fox World News
A physician suspected in four slayings in Nebraska and arrested in southern Illinois is waiving extradition and will return to Omaha to face murder charges.
Unshaven and wearing grey striped scrubs and orange slippers, Anthony Garcia offered only short responses during Wednesday’s brief court appearance in Union County.
“Absolutely, yes,” he said when asked by Circuit Judge Mark Boie if he was returning to Nebraska voluntarily and understood a one-page extradition waiver.
A lawyer for the 40-year-old from Terre Haute denied the allegations.
“My client steadfastly professes his innocence,” said Bob Motta, who along with his wife Alison, is representing Garcia in the extradition case and his prosecution in Nebraska. “The game is afoot. The state (Nebraska) has a heavy burden and we’re going to put it to the test.”
Motta declined to go into details of the Nebraska case following Wednesday’s 15-minute hearing in Jonesboro. But he bristled at suggestions by Nebraska authorities that Garcia showed traits of a serial killer, calling that “patently absurd.”
Garcia was arrested in Illinois on Monday after a traffic stop and was being held without bond.
It was unclear when Garcia will return to Omaha; Nebraska officials will have to travel to Illinois to accompany him back. Union County assistant state’s attorney Kelley Zuber told the judge that Nebraska authorities said they would collect Garcia within two weeks. Union County Sheriff David Livesay told The Associated Press after the hearing that he did not expect the transfer to happen on Wednesday.
Garcia is accused of killing four people with ties to a Nebraska medical school that fired him more than a decade ago. The slayings took place in two separate attacks five years apart.
His arrest came two months after Creighton professor Roger Brumback was fatally shot and his wife stabbed to death in their Omaha home. Back in 2008, the son of another pathology professor, William Hunter, and his housekeeper were stabbed to death in an affluent Omaha neighborhood near the home of billionaire Warren Buffett.
Brumback and Hunter fired Garcia, who’s been denied a medical license in at least two states.
Neither police nor Creighton officials have detailed …read more
Source: FULL ARTICLE at Fox US News
British interior minister Theresa May on Tuesday laughed off suggestions she was needed at the imminent royal birth, saying the custom of making sure the “baby hadn’t been smuggled in” no longer existed.
Lawmaker Michael Ellis admitted he was being “mischievous” when he posed the question to May at a select committee hearing.
Prince William’s wife Catherine is due to give birth to Britain’s future monarch at the private Lindo Wing of St Mary’s Hospital any day now.
“Until relatively recently there was a convention that home secretaries attended royal births, I understand this happened with her majesty the queen,” he said.
“Do you have any plans to visit the Lindo Wing any time soon, following this convention?”
May countered that the centuries-old custom no longer existed.
“It is no longer the case that the HS is required to attend a royal birth, but I suspect Mr Ellis with your royal connections you might have more information about these things than I do,” she said.
Asked why the convention ever existed, she explained: “It goes back many centuries…. The home secretary had to be there to evidence that it was genuinely a royal birth and that a baby hadn’t been smuggled in.”
Source: FULL ARTICLE at Fox World News
By dagregster
My 3rd floor in my small stone twin has a cathedral ceiling with no attic or soffits to speak of. I have been looking at the Air King window fans but was also wondering if anyone here has tried building a DIY whole house window fan. My thought was to use something like an Air Vent Gable fan and mount it in a box with a screen, some sort of switch that can contol speeds, and of course, a screen. This would then git perfectly in my 25″ wide double hung window otherwise, I would have to go to great pains to retrofit the Air King.
Another way might be to have my roofer install a roof mounted type fan but they don’t seem to move as much air. My roof is asphalt on wood (1″ thick) with about 8 inches of insulation, then drywall.
I would appreciate any thoughts or suggestions on a way to proceed here. My goal is to pull as much air as possible through the house but also to have it be not too noisey as the 3rd floor is one big room and that is our family room. Is there a product that I should look at? What about my DIY fan idea?
Thanks so much!
Greg
Source: DoItYourself.com
By limonger
The cherry tree is ancient and doesn’t produce much, and the pear tree is small, but the crabapple and peach trees are growing hundreds, maybe thousands of pounds of fruit this year! I’m going to try to prune back the peach trees this winter and hopefully reduce the production in the future, but for this year I’ve still got a massive fruit disposal issue.
I have no use for the fruit. I would not think it is really fit for human consumption, but I don’t know. In the past, I’ve normally just left the fruit lay on the ground and rot, but the output this year is far more than in years past.
The only disposal solutions I’ve found by Googling involve composting, and I have no use for any compost. Plus I don’t have any other cuttings to mix in the compost, and it seems like creating a single huge pile of rotting fruit wouldn’t be any better than just letting it rot where it falls. Little or no grass grows under these trees.
Of course, I’m looking for a solution that won’t cost anything other than my own labor, and I fully realize that I may be asking for too much, I’m really just grasping at straws here.
Thanks for any suggestions!
Source: DoItYourself.com
By Matt Cantor
Got the latest version of iOS on your phone? Don’t expect spell-check to help you out when you type “abortiom.” After using an iOS 6 simulator, the Daily Beast found iPhones do not offer spelling suggestions for a range of fairly common but controversial words, even when they’re misspelled by… …read more
Source: FULL ARTICLE at Newser – Home
Pakistani Taliban commanders Tuesday rejected suggestions they were sending fighters to Syria, saying some have gone there independently but the movement’s focus remained in Pakistan.
They said some militants, mainly Arabs and Central Asians, had gone to fight the forces of President Bashar al-Assad, but a senior Taliban leader dismissed reports of them setting up camps in Syria.
The lawless tribal areas of northwest Pakistan along the Afghan border have long been a magnet for militants from across the Muslim world eager to fight US-led NATO forces in Afghanistan.
But since the uprising against Assad began in March 2011, foreign jihadists have flocked to Syria, where disparate rebel groups are seeking his downfall.
Some media reports in recent days have claimed scores or even hundreds of Pakistani Taliban are among them and that they have set up camps in Syria.
A senior commander who sits on the shura or ruling council of the Tehreek-e-Taliban Pakistan (TTP) told AFP there was no tactical shift and no decision had been made to send forces to Syria.
“There is no reality in these reports, we have far better targets in the region, NATO troops headed by the Americans are present in Afghanistan,” he said on condition of anonymity.
“We are already in a war with Pakistani troops. We support the mujahideen’s struggle in Syria but in our opinion, we have a lot more to do here in Pakistan and Afghanistan.”
The TTP is an umbrella group for numerous factions trying to bring down the Pakistani state and impose sharia law. It has ties to the Afghan Taliban and Al-Qaeda.
“The great evil (America) is here in Afghanistan, troops from 30 kafir (non-believer) countries are attacking innocent people in Afghanistan, so Bashar al-Assad is not that important for us,” the TTP commander said.
“Obama is the big evil, Americans are a much bigger evil for us. The Taliban shura has never discussed sending mujahideen to Syria.”
Another mid-ranking TTP commander in Miranshah, the main town of North Waziristan tribal district which is a hotbed of Taliban and Al-Qaeda activity, said some fighters had gone to Syria “in a personal capacity”.
A third senior TTP cadre said those who had gone were mostly Arabs, Uzbeks and Chechens.
More than 100,000 people have been killed since the uprising against Assad erupted, according to the Syrian Observatory for Human Rights.
Analyst Rahimullah Yusufzai dismissed claims of the TTP setting up camps in Syria as “a publicity campaign” by some of the militants.
“But we cannot deny the fact that they are quite ambitious and want to send a clear message to the world that they are still very strong and have strong linkages with other local and international groups,” he said.
Ismail, an Arab fighter from Al-Qaeda, told AFP in northwest Pakistan that he planned to join the fight against Assad.
“I am going to Syria in the next few days, my family will stay here,” he said.
“Our mujahideen are going not only to Syria but also to Lebanon, Egypt and other Arab countries.”
Saifullah Khan Mahsud, the executive director of the FATA Research Centre …read more
Source: FULL ARTICLE at Fox World News
By dpforu
I welcome all ideas, suggestions and hints.
We just bought a brick house built in 1972. The crawl space is only about 30-36″ high. The house is a two story with a 38′ X 68′ foot print. There are not many vents in the crawlspace. There are remnants of black plastic in the crawlspace. The land is flat as a flitter. The ground is clay and will not absorb water. The locals call it flatwoods. and of course Central Alabama has one of the highest humiidities known to man.
Here is what my husband and I originally thought we would do:
1. grade the ground around the house …. create a slope away from the house
2. remove all bushes and shrubs away from the house and have a 24″ pea gravel perimeter
3. put 12mil plastic down with a 12” overlay and put the plastic up the sides of the wall, but leave the vents open
4. install 2 crawlspace dehumidifiers , one on each end.
But now……
i am hearing we need to encapsulate, no don;t ….encapsulation is bad in the South, close the vents, no, add more vents, encase the floor joists, put foam board on the sides on the walls etc etc
I read the moisture comes from the ground, no it comes from inside the house, no it comes from the air around the exterior of the house.
To say the least I am confused.
And remember termites are a problem, especially here in Central Alabama flat woods.
Once we decide what to do what is the best way for us to guage our success. Is there meters?
Any all ideas greatly appreciated.
Blessings!~
Source: DoItYourself.com
By Shaigon
So I seem to have developed an ant problem. They have never been an issue for me until this year. I first found them in my bedroom – I put down some liquid ant killer (the stuff they’re supposed to return to the colony and kill the queen etc) and it seemed to work quite well. Within 20 minutes or so there was a good trail of ants carrying this stuff back. After a couple days there were no ants in my room anymore.
A few days later I notice there’s a lot of ants in my living room. So again I put down the ant killer, they swarm it, and a couple days later I’m ant free again. However it seems like I’m just repeating this process now. I’ll go ant free for a few days, but they just keep coming back..why? Shouldn’t the ant killer have taken care of them?
I don’t know where they are coming in – I live in an apartment and they run underneath my heating vents and there’s no way for me to tell where they go after that.
They aren’t feeding on anything specific (aside from the ant killer) – my place is very clean and they just seem to wander around aimlessly if they aren’t feeding on the ant killer.
Anyone have any suggestions?
Source: DoItYourself.com
By atDev
There is an area between the two floors where I can run the drain with enough slope to connect to the main drain line of the house. However, the problem is it would be about 18ft of pipe. I wouldn’t have access to the area where I run the pipe, but am only pushing the pipe through to the other side, meaning I only have access to both ends of the pipe. The problem is securing the drain pipe as I don’t have access to the middle area where the pipe runs.
Any ideas or suggestions? If it is a simple drain line for a utility sink should it still be secured somehow besides at the two ends?
Source: DoItYourself.com
By homeowner7
We have vinyl siding and exterior side-by-side shutters on the side of the house with a frame just for cosmetic purposes. It was all there when we moved in. One of them fell off the other day and we found out the wall is wide open – you pull the shutter off and look right into the the guts of the house, meaning water just slips directly into the frame of the house. I had a friend suggest putting in Hardie board and caulking it shut but once we do that the thickness of the hardy board will mean the shutter won’t fit anymore
Any cosmetic suggestions if we fill in the holes with hardie board, or alternative repair suggestions? I can’t think of any alternatives that wouldn’t just look stupid. Additional vinyl paneling would look a little goofy with all the small cuts.
Erin

Source: DoItYourself.com
Since the last update my 550 paracord (both orange and purple) and vinyl wrap has been put to use, mostly on the mac mini, i still have plenty of both left though. Unfortunately, i broke my psu after i got the +4 pin done so sleeving will have to wait until i’m less poor. As a result, i made some other stuff with the paracord.
The mac mini is being a pain though. When i went to test the latest PPC netboot image (and test the mac worked) it made the chime noise and the cd spun up, but nothing appeared on my screen. As a result, the cd is now trapped. I’m assuming the issue is that the monitor is 1080p and was connected by DVI-D (digital)
I’m also looking into putting a tablet in the top, possibly mounted with paracord, rather than a second window. Then i will truly fit balloons’s series of “testing all the things”. The other window will be cut as soon as my dad get’s time to print an A3 sized stencil of the ubuntu logo. Now sit back and enjoy the pics.
The mac mini cover, separated…
… and joined
The underside
As you can see, the vinyl wrap isn’t easy to use. But that will be covered by the ITX board. (The holes are for mounting the board)
The internals of the mac mini
The DVD drives are stealthy again.
The rest will be wrapped soon
The belt i made. It works really well.
Questions for the comments section:
1. Should it be a Tablet or a window on the top?
2. Should i make a “door” for the mac mini and itx board. (They will be mounted in the 5.25″ bays vertically)
3. Should the motherboard be painted orange or purple (what seems to be the “new” ubuntu colour)
4. (If i get a tablet) How should the tablet bee mounted?
5. What other suggestions do you have?
Forums this is on: http://forums.atomicmpc.com.au/index.php?showtopic=54532 http://www.overclock.net/t/1395747/case-mod-ubuntu-pc
Help fund this (Please): http://www.gofundme.com/39uhgg
Source: FULL ARTICLE at Planet Ubuntu



Source: DoItYourself.com
By dbarndt
I have been all over the web and have been striking out, so I hope someone here can point me in the right direction.
I have built two (identical) loft beds for my two older sons in the past, and now am in the process of building a third for son #3. I have used plans bought from a woodworker online, and they have worked well. He even included all the hardware needed at a good price (about $50). However, the woodworker retired a few years ago and I haven’t been able to reach him this time around. So I need to find an alternative source for the hardware.
Here’s what I need:
32 – 5/16″ x 3″ black oxide-plated hex lag bolts/screws
32 – 5/16″ (inner hole diameter) / 7/8″ or 1″ (total diameter) black oxide-plated washers
86 – #12 x 2 1/2″ black oxide-plated flat Phillips head wood screws
The only luck I’ve had is finding wholesale quantities of the screws (ex. 500+). My question is, does anyone know of a supplier where I could get these for something reasonable (ex. < $100)? One option seems to be to buy unfinished/plain fasteners and then pay to get them plated with black oxide – is that the best bet? Again, any suggestions?
One other question I have is, can black oxide be coated over another plating, like Zinc, or does the hardware have to be unfinished/plain?
I do have a fallback – there’s a Fastenal store near my work which will outsource the plating with a 2-day turnaround, but the total cost is $162 ($37 for the fasteners, $125(!) for the plating). Just wondering if I can find anything cheaper.
Thanks very much for any and all suggestions! I have enjoyed reading these forums in the past.
Dave B.
Source: DoItYourself.com