Hi, I recently moved into a house that had a security system built-in. The alarm was disconnected and when I tried to reconnect for my own use, it was armed and counting down to its alarming. I have disconnected the Siren and used a resistor (there were 5 left in a baggie in the control panel from Ranger American) to block the terminal. I have reset the system to defaults and changed the master code to my linking. I am now in need of help for setting up the Zone attributes, my zones are setup as followed:

Zone 1: Garage and Front Door
Zone 2: Windows Downstairs
Zone 3: Patio
Zone 4: MBR (Master Bedroom) Windows
Zone 5: Upstairs Windows

*These are all at default values*
What I would like is for Zone 1 to be Delayed Entry/exit on Stay and AWAY.
Zone 5 to be Bypassed on STAY and Instant on AWAY.
Zone 3 to be delay on STAY and Instant on AWAY.
Zone 4 to be Instant on both Stay and Away.

Can you include the keypad combinations as well? (Noob)
How can I change the Delay to 15 seconds?

I am new at DIY Security Systems so all help is greatly appreciated. 🙂
(DSC PC1555RKZ keypad and DSC PC1555)

Attached Images